CMG Granulators at Textiles Recycling Expo 2025
22 May 2025
CMG Granulators at K 2025 (hall 9 / C10): Innovative, highly efficient and sustainable recycling solutions
9 July 2025
CMG Granulators will take part at the event Packaging & Recycling 2025 (booth 10) that will take place on 25th and 26th of June at the Museo Storico Alfa Romeo in Arese (Milan).
Packaging & Recycling 2025 is the forum dedicated to the packaging and recycling industry in Italy, the event that no operator in the sector can miss.
Now at its eighth edition, Packaging & Recycling 2025 is dedicated to plastic packaging and its lifecycle, from design to post-consumer recycling.
Innovation & Performance: New cutting chamber design
CMG Granulators is introducing a brand new cutting chamber design for its Evoluzione series granulators. The new rotor configuration allows the rotor blades to cut the plastic feedstock perpendicularly against the bed blades, obtaining the highest degree of cutting penetration and precision.
The rotor blades are mounted on the edge of the rotor holding modules and not on a holding block. Not only this feature is beneficial, as the inclination of the rotor blades is very high, but it also allows easy and quick servicing/replacement of the blades, with comfortable access from the front of the machine.
The rotation of the rotor does not produce the very detrimental “drag” effect, meaning the mass of material being ground in the cutting chamber does not rotate with the rotor producing lots of dust and fine particles, that will all become waste through the washing line. The production of fine particles is reduced to few percentage points, versus a common 15% or more from conventional granulators.
The rotor is of the open type design, taking only 30% of the cutting chamber volume.
The rotor/cutting chamber volume utilization ratio is 30/70, versus alternative ordinary granulators with 70/30 ratio. This feature alone allows more than double the quantity of material in the cutting chamber. The more is the material in the cutting chamber, the higher is the capacity of granulation.
The new cutting chamber has the so called “tangential set up”. Such characteristic confers voraciousness and guaranteed bite, with no need of feeding aid devices, commonly utilized with conventional granulators.
New G55 Line: High Capacity, Robustness, Precision
CMG launches the new G55 granulator line, for high capacity applications. Many are the very innovative and unique attributes of the new series and all contribute to obtaining the highest degree of productivity, regrind quality (homogeneous particle dimensions and absence of dust), efficiency of operation, cleanest environment and the lowest TCO. The standard configurations of the new series cover capacities starting from 700 kg/h all the way up to 1.300 kg/h.
The new G55 Line is made of two models: G55-90 and G55-120. The line features integral sound enclosure and a very innovative feed hopper design to accommodate the widest variety of shapes and dimensions for the parts to grind. All models operate in high-efficiency conditions, are all equipped with EISA premium-efficiency motors and can have AMP controls (Adaptive Motor Power). Energy utilization is 25 Wh/kg vs the + 50 Wh/kg and more of conventional solutions.
Customer Service
With Headquarters, Production Site and Technical Center in Italy, and the largest distribution network in the plastics industry, CMG is active all over the world with localized technical service, spare parts and sales centers. Find the nearest CMG service center at the following link: https://www.cmg-granulators.com/en/contacts